|
Important
Instructions on using Bio MPG/Emission Improver
First
of all these Instructions are just a guide line.
Every vehicle, Gas or Diesel is a little different.
You might need to adjust the dosage for “your”
vehicle to achieve optimum results. We suggest that
you start out with the dosages listed below for the
first 3 to 4 tanks and monitor your results. If you
haven’t changed your fuel filter or air filter
recently, we recommend you do before getting started.
Everytime
you fill up you must add our product to your tank. Please
make sure you have less than a quarter tank of gas when
you fill up. We all have computers in our vehicles that
recognize the octane of the fuel we are adding; when
your tank gets below ¼ tank the computer will
read the fuel correctly and generally burn the fuel
more efficiently.
-
Make sure you know how many miles per gallon and/or
miles per tank you are currently getting
before
using any Bio MPG/Emission Improver. (See EXAMPLE
BELOW)
-
Follow these important instructions when using the
product: The product comes in powder form. Don’t
ever short - change your tank on the recommended
dosage of the product or you will not receive the
maximum savings. Also, don't miss using the product
in any tank. Remember… it takes UP TO 4 consecutive,
complete tanks before you receive maximum results.
If you miss a tank of using the product, then you
must start completely over. Most people notice a
difference within their
first 2 tanks… and then it is extremely important
to always use the product on every fill up thereafter,
so you can keep getting the Maximum results!
Recommended
Dosages
GASOLINE
- 1 teaspoon per 15 gallons.
DIESEL - 1 teaspoon per 10 gallons.
Use 1
teaspoon for every 15 gallons of gas. Using a funnel
makes it much easier to get the powder into your
tank if you don’t have one of our dispensers.
If you’re adding fuel after your initial treatment,
simply add the appropriate amount of powder to treat
the fuel you are adding on this fill up. As an example,
if you have a 30 gallon tank and you only pump 15
gallons of gas, you would only use 1 teaspoon of
product.
-
Keep a close record of your miles per gallon or
miles per tank usage when you begin
using your dosage of Bio MPG/Emission Improver.
Don’t depend on the computer in your car to
give correct calculations, please calculate the
miles per gallon by hand. This is very important
to
get the correct percentage of savings.
-
Remember some people even notice a difference with
their first or second tank, but it can take up to
4 consecutive complete tanks to get maximum results!
-
Keep the powder at room temperature. It should be
kept in a fresh place, out of the sunlight, and
in its airtight container. I use a small lunch cooler.
Disclaimer:
Use only as directed. If this product is used for anything
other than what it is designed for and according to
the instructions, we are not responsible or liable for
the outcome. Store in ventilated areas. NOT FOR HUMAN
CONSUMPTION.
How to calculate M.P.G. (Miles Per Gallon)
in 4 easy steps:
Step
1. Filling the vehicle's gas tank completely
and writing down the vehicle's odometer reading (mileage).
Example:
The last time the tank was filled, the odometer reading
was 32,645.1 miles.
Step
2. When it's time to refuel, filling the tank
completely (E)mpty to (F)ull. Write down the number
of gallons it took to fill the tank from the gas pump
display, and write the vehicle's new odometer reading.
Once two odometer readings are taken, MPG can be calculated.
Example:
The next time the tank was filled, the odometer reading
was 33,001.3. It took 13.5
gallons to fill the tank
Step
3. Calculating the distance driven by subtracting
the new odometer reading from the previous one.
Example:
The distance driven would be 33,001.3 minus 32,645.1,
or 356.2 miles.
Step
4. Dividing the number of miles driven by the
number of gallons it took to fill the tank. The result
is the vehicle's M.P.G. for that driving period.
Example:
356.2 miles divided by 13.5 gallons equals 26.4 miles
per gallon.
The
M.P.G. for that driving period would be 26.4
Additional notes: If you aren’t
experiencing a significant increase then try a little
less product and see what happens. Not only does this
benefit you, the consumer, but it is a lot fun seeing
just how much increase you end up with. We have some
customers who use only ½ dosages and are getting
great results. Also, you may need to disconnect your
negative battery cable and connect it back. This resets
the computer brain in your car for a fresh reading of
your fuel. You may also need change your fuel filter
after your 3 rd or 4 th tank of fuel if you notice a
drop in fuel mileage. Some higher mileage vehicles have
a build up of residue and because of the extensive cleaning
this product does to your fuel tank & lines the
residue gets trapped in the filter.
|
